Beloit Trail Bridge


Click the photo to view the full-size version

1/28
Date Taken:
Author:
Caption:

Name Beloit Trail Bridge
Chicago & North Western Railway Bridge #51
Built By Chicago & North Western Railway
Currently Owned By City of Beloit
Superstructure Contractor American Bridge Company of New York
Substructure Builder John Welsh of Janesville, Wisconsin
Length 336 Feet Total, 84 Foot Spans
Width 1 Track
Height Above Ground 15 Feet (Estimated)
Superstructure Design Through Plate Girder
Substructure Design Stone Masonry
Date Built 1911
Traffic Count 0 Trains/Day (Bridge is Open to Pedestrian Traffic)
Current Status Open to Pedestrian Traffic
Chicago & North Western Railway Bridge Number 51
Significance Local Significance
Documentation Date 6/14/2014; 10/23/2022

In 1860, the Beloit and Madison Railroad (B&M) constructed 17 miles of railroad, extending from Beloit, Wisconsin to Magnolia, Wisconsin.  In 1864, the B&M constructed an additional 32 miles of railroad, extending from Magnolia to Madison, Wisconsin.  In 1864, the Madison, Lodi and Baraboo Railroad (ML&B) began grading for a new railroad line, extending from Baraboo, Wisconsin to Merrimac, Wisconsin.  The ML&B was acquired by the Baraboo Air Line Railroad (BAL) in 1870, and began construction on a line extending from Reedsburg, Wisconsin to Madison.  In 1870, the La Crosse, Trempealeau and Prescott Railroad (LCT&P) constructed an additional 29 miles of railroad, extending from the Winona & St. Peter Railroad (W&StP) at Winona, Minnesota to the north side of La Crosse, Wisconsin; constructing a large bridge across the Mississippi River.  The BA&L and the B&M were acquired by the Chicago & North Western Railway (C&NW) in 1871.  The C&NW continued construction, eventually opening a 129 mile line between Madison and present-day Medary on the north side of La Crosse in 1873.  This line was difficult to construct, as it crossed through areas of rugged terrain, requiring three tunnels and numerous wooden trestles.  The LCT&P was purchased by the C&NW in 1876.

Soon after completion, this line became an important route for the C&NW.  The line connected an existing mainline to Chicago with the existing W&StP mainline across southern Minnesota.  In addition, the Chicago, St. Paul, Minneapolis & Omaha Railway (Omaha Road, a C&NW subsidiary) mainline ended at this line in Elroy, Wisconsin, providing the C&NW with a connection to the Twin Cities.  Numerous improvements were made in the late 1870s and throughout the 1880s, including filling wooden trestles and replacing wooden bridges with iron and stone.  The C&NW constructed a short 4-mile branch line from Medary to La Crosse in 1886.  By the late 19th Century, traffic over this route had grown to the point that a second track was necessary.  Between 1896 and 1899, the C&NW completed a second track between Evansville, Wisconsin and Elroy.  By the early 20th Century, the C&NW was operating an expansive railroad network throughout the Midwest, radiating north and west from Chicago.  This line initially served as one of the principal mainlines of the railroad, connecting Chicago to the Twin Cities and the mainline to South Dakota.

Between 1910 and 1912, the C&NW undertook a large construction program to construct shorter routes and streamline operations.  A cutoff between Milwaukee and Sparta opened in 1911, reducing the importance of this line.  Between 1953 and 1956, much of the double track would be removed.  A portion of the line was abandoned between Elroy and Sparta in 1964, and became one of the United States first rail-trail projects.  In 1978, the Sparta to Medary and Winona to Trempeleau, Wisconsin segments would be abandoned, followed by the Beloit to Evansville segment in 1979 and the Medary to Trempeleau and La Crosse segments in 1981.  The Reedsburg to Elroy segment was abandoned in 1987.  All of the line west of Reedsburg would be acquired by the Wisconsin Department of Natural Resources for trail use.  

In 1995, the C&NW would be purchased by Union Pacific Railroad (UP).  In 1996, UP leased the Fitchburg to Reedsburg segment to the Wisconsin & Southern Railroad (WSOR).  In addition, UP attempted to abandon the Evansville to Fitchburg segment the same year.  In response to possibly losing railroad service, the communities of Fitchburg and Oregon purchased the line, although it was out of service.  In 2014, the State of Wisconsin acquired the Fitchburg to Reedsburg line, and contionued to lease it to WSOR.  The same year, WSOR began operations over the Oregon to Fitchburg line, while the Evansville to Oregon segment remains out of service.  Today, WSOR operates the Reedsburg Subdivision between Madison and Reedsburg.  The 400 State Trail uses the former railroad between Reedsburg and Elroy; the Elroy-Sparta State Trail uses the former railroad between Elroy and Sparta; the La Crosse River State Trail uses the former railroad between Sparta and La Crosse; and the Great River State Trail uses the former line between Medary and Marshland.  


Located in Beloit, this through plate girder bridge carries a former Chicago & North Western Railway line over the Rock River. The first bridge at this location likely consisted of a wooden truss bridge, constructed when the line was first built. It is believed that this bridge was renewed with a wooden Howe through truss bridge in the late 1860s or early 1870s. During the late 1870s and early 1880s, the C&NW invested significant capital into many of their lines, replacing wooden bridges with stone and iron structures. In 1883, the timber bridge would be replaced with four 84-foot, riveted double intersection Warren pony truss spans, set onto new stone substructures. The iron trusses were fabricated by the Alden and Lassig Bridge & Iron Works, a prominent builder of iron bridges for the C&NW in the early 1880s. The stonework was completed under the direction of John Welsh, a contractor from Janesville who also was employed by the C&NW to build bridges. By the early 20th Century, this design of truss bridge became too light for increasingly heavy trains. In 1911, the truss bridge was replaced by the present through plate girder bridge, reusing the stone substructures. It is likely that the truss spans were reused, either along branch lines or for overpasses at points throughout the C&NW system.

Currently, the bridge consists of four 84-foot through plate girder spans, set onto stone substructures. The superstructure uses a standard design, with heavy plate girders, a traditionally composed floor and rounded and tapered girder ends. The floor is constructed using a series of floorbeams spaced throughout the span and two stringers per span, both of which are constructed of light riveted plate girders. The piers use a standard diamond shape, while the abutments use a standard design with short stepped wing walls. Stone for the substructures was quarried at Ablemans (Rock Springs), Wisconsin, a quarry where the C&NW produced much of their stone for bridge use. American Bridge Company fabricated the superstructure, and there were no apparent alterations to the substructure when the present bridge was constructed. Through plate girder spans were commonly used by railroads, as they were durable and easy to construct. After abandonment, a concrete deck and lighting was added to the bridge, and the superstructure painted an attractive black color. Currently, the bridge serves an unnamed pedestrian trail. Overall, the bridge appears to be in fair to good condition, with no significant deterioration noted. The author has ranked this bridge as being locally significant, due to the common design.


Citations

Build date and builder (superstructure) American Bridge Company plaque
Builder (substructure) The Beloit Daily Free Press; August 17, 1883
Railroad History Citation ICC Valuation Information, Compiled by Richard S. Steele

Loading...