Three Rivers Trail - IA-3 Bridge


Click the photo to view the full-size version

1/19
Date Taken:
Author:
Caption:

Name Three Rivers Trail - IA-3 Bridge
Chicago & North Western Railway Bridge #2543 1/2
Built By Chicago & North Western Railway
Currently Owned By Humboldt County Conservation Board
Superstructure Contractor Unknown
Length 198 Feet Total, 45 Foot Main Span
Width 1 Track
Height Above Ground 15 Feet (Estimated)
Superstructure Design Steel Stringer and Timber Pile Trestle
Substructure Design Timber Pile
Date Built 1956
Traffic Count 0 Trains/Day (Bridge is Open to Pedestrian Traffic)
Current Status Open to Pedestrian Traffic
Chicago & North Western Railway Bridge Number 2543 1/2
Significance Minimal Significance
Documentation Date 8/12/2013; 3/15/2019

In 1881, the Toledo & Northwestern Railway (T&NW) began construction on a 160-mile railroad line extending from Eagle Grove, Iowa towards Hawarden, Iowa. The T&NW had been leased by the Chicago & North Western Railway (C&NW) in 1879, and was awarded funding to construct additional lines in northern Iowa.  The first 30 miles were completed to Bradgate, Iowa at the end of the year, followed by an additional 115 miles between Bradgate and Hawarden in 1882. In 1883, the Dakota Central Railway (DC) continued the line, constructing an additional 125 miles between Hawarden and Iroquois, South Dakota.  The DC was another railroad leased by the C&NW, and was also awarded funding to complete railroad lines in South Dakota.  The T&NW was purchased by the C&NW in 1890, and the DC was purchased by the C&NW in 1902.  By the early 20th Century, the C&NW had developed into a significant railroad network in the midwest, with lines radiating north and west from Chicago.  In particular, the C&NW developed dozens of secondary and branch lines in Iowa to serve agricultural industries and small towns. This line served as a secondary mainline, connecting lines in western Iowa and South Dakota.  In addition, the line connected the Dakota Division mainline at Iroquois to the Iowa Division mainline at Tama, Iowa.

Due to the rapid expansion of the C&NW in the late 19th and early 20th Century, this line paralleled several other routes.  By the mid-20th Century, this line had largely become a branch line, connecting agricultural industries and small towns in western Iowa and eastern South Dakota.  By the 1970s, the C&NW sought to abandon excess trackage and consolidate service.  The first segment abandoned was from Orange City, Iowa to Hawarden in 1975.  The Beresford, South Dakota to Iroqouis segment was abandoned in 1979, and the Hawarden to Beresford segment sold to the State of South Dakota in 1980. The Marathon, Iowa to Orange City segment was also abandoned in 1980.  The D&I Railroad began operations over the Beresford Branch in 1980.  The line was further abandoned in 1982, when the Alton, Iowa to Orange City segment was abandoned.  The Eagle Grove to Rolfe, Iowa segment was abandoned in 1988, and would be sold to Wright, Humboldt and Pochahontas Counties for trail usage.  In 1995, the C&NW would be purchased by the Union Pacific Railroad (UP).  Currently, UP operates the Rolfe to Marathon segment as part of the Laurens Subdivision, and the D&I operates the Hawarden to Beresford segment.  The State of South Dakota sold the Hawarden to Beresford segment to D&I in 2021 as part of an effort to sell state-owned railroad lines.  The Rolfe to Eagle grove segment used as part of the Three Rivers Trail.  Remaining segments have been abandoned and the right-of-way largely reverted to adjacent landowers.


Located on the north side of Humboldt, this steel stringer and timber pile trestle bridge carries a former Chicago & North Western Railway line over Iowa Highway 3. In the mid-20th Century, the Iowa State Highway Commission worked to realign busy roadways throughout the state and improve railroad crossings. Several projects to construct grade separations were initiated in the years after World War II. One of the selected projects was to realign Iowa Highway 3 and construct a new grade separation at the C&NW crossing. Contracts for the project were awarded in mid-1955, and the work was completed in 1956. Currently, the bridge consists of a 45-foot steel stringer span, set onto timber pile piers and approached by timber pile trestle spans on either end. The entire bridge runs at a heavy skew, due to the angle at which it crosses the roadway. The main span follows a standard design for the era, with four heavy beams arranged into two sets of two. An unknown contractor fabricated the main span, while railroad company forces constructed the timber components of the bridge. Steel stringer and trestle bridges were popular with railroads, as they were cheap and easy to construct. Since the initial construction, the bridge has seen no significant alteration. Today, a wooden deck and handrails have been added and the bridge carries the Three Rivers Trail. Overall, the bridge appears to be in fair to good condition, with no significant deterioration noted. The author has ranked this bridge as being minimally significant, due to the common design and newer age.


Citations

Build date National Bridge Inventory (NBI)
Railroad History Citation ICC Valuation Information, Compiled by Richard S. Steele

Loading...