Name | UP Dodge Street Bridge (Springfield) Chicago & Alton Railroad Bridge #184.5 |
Built By | Chicago & Alton Railroad |
Currently Owned By | Union Pacific Railroad |
Superstructure Contractor | American Bridge Company of New York |
Substructure Contractor | Unknown |
Length | 69 Feet Total, 35 Foot Main Span |
Width | 2 Tracks, 1 In Use |
Height Above Ground | 11 Feet 3 Inches |
Superstructure Design | Through Plate Girder |
Substructure Design | Stone Masonry and Steel Bent |
Date Built | 1902 |
Traffic Count | 20 Trains/Day (Estimated) |
Current Status | In Use |
Chicago & Alton Railroad Bridge Number | 184.5 |
Union Pacific Railroad Bridge Number | 184.50 |
Significance | Local Significance |
Documentation Date | 2/17/2024 |
In 1850, the Alton and Sangamon Railroad began construction on a 220 mile railroad line, extending from Joliet, Illinois to Alton, Illinois; with stations in Bloomington and Springfield, Illinois. The railroad was acquired by the Chicago, Alton & St. Louis Railroad and completed in 1855. The Alton and St. Louis Railroad constructed a 22 mile line from Alton to East St. Louis in 1856. The railroads were reorganized as the St. Louis, Alton & Chicago Railroad in 1857, and was merged into the Chicago & Alton Railroad (C&A) in 1862. The C&A developed several lines throughout central Illinois, and this route made up the principal mainline of the system. A bypass of Alton between Godfrey and East St. Louis was constructed in As traffic grew on the system through the 1870s and 1880s, the need for a second track became apparent. A second track was added in 1870 between Mazonia and Odell, from 1888 to 1893 between Odell and Bloomington, and through Springfield in 1893. This route became an important route to the Illinois railroad network, providing the most direct connection between St. Louis and Chicago.
Throughout the years, the C&A would be affiliated with several
larger railroads, and the railroad primarily operated as a bridge
route. The C&A was reorganized in 1901, and until 1906 was owned by
the Atchison, Topeka & Santa Fe Railway and the Chicago, Rock
Island & Pacific Railway. Between Bloomington and Springfield, a second track was constructed in 1907, and a second track was constructed in 1911 between Springfield and East St. Louis. A large realignment was made between Atlanta
and Lawndale in 1924. In 1931, the C&A would be reorganized as the Alton Railroad (A), a
subsidiary of the Baltimore & Ohio Railroad. The Alton was sold to
the Gulf, Mobile & Ohio Railroad (GM&O) in 1949, and the various
subsidiaries consolidated at that time. The GM&O merged with the
Illinois Central Railroad to form Illinois Central Gulf (ICG) in 1972.
During the ICG years, the route was downgraded, and the second track mostly removed. This line was excess for the ICG, and the route would be sold to the
Chicago, Missouri & Western Railway (CM&W) in 1987. The CM&W went bankrupt, and the line was sold to the Southern Pacific Railroad in 1989, which became part of Union Pacific Railroad in 1996. During the 2010s, the route was rebuilt for high speed rail. Today, Union Pacific continues to operate this route as the Joliet Subdivision between Joliet and Bloomington, and the Springfield Subdivision between Bloomington and East St. Louis. High speed Amtrak trains also utilize this route.
Located in Springfield, this through plate girder bridge carries the former Chicago & Alton Railroad mainline over Dodge Street. It is unknown if there was a previous bridge at this location. During the late 1890s and early 1900s, the C&A began a series of improvements in Springfield, double tracking and rebuilding portions of the line. Built in 1902, the bridge consists of a 35-foot and two 17-foot double track through plate girder spans, set onto stone abutments and steel bent piers. The girder spans use a standard design, with a traditionally composed floor and rounded and tapered ends. The steel bents consist of built-up columns, which are connected by built-up beams and solid lateral bracing. American Bridge Company fabricated the superstructure of the bridge, while an unknown contractor or railroad forces constructed the abutments. This type of bridge was popular with railroads, as it was durable and easy to construct. Since the initial construction, the bridge has been strengthened and it appears the stringers of the bridge have been replaced. Today, only one track remains in use. Overall, the bridge appears to be in fair to good condition, with no significant deterioration noted. The author has ranked this bridge as being locally significant, due to the common design.
Citations
Builder and build date | American Bridge Company plaque |
Railroad History Citation | ICC Valuation Information, Compiled by Richard S. Steele |