Name | UP Branch Rooks Creek Bridge Chicago & Alton Railroad Bridge #100.2 |
Built By | Alton Railroad |
Currently Owned By | Union Pacific Railroad |
Superstructure Contractor | Unknown |
Length | 76 Feet Total, 15 Foot Spans |
Width | 2 Tracks, 1 In Use |
Height Above Ground | 15 Feet (Estimated) |
Superstructure Design | Steel Stringer (West Track) Concrete Modular Girder (East Track) |
Substructure Design | Concrete |
Date Built | 1937 (West Track) c. 2005 (East Track) |
Traffic Count | 20 Trains/Day (Estimated) |
Current Status | In Use |
Alton Railroad Bridge Number | 100.2 |
Union Pacific Railroad Bridge Number | 100.20 |
Significance | Local Significance |
Documentation Date | 4/2/2023 |
In 1850, the Alton and Sangamon Railroad began construction on a 220 mile railroad line, extending from Joliet, Illinois to Alton, Illinois; with stations in Bloomington and Springfield, Illinois. The railroad was acquired by the Chicago, Alton & St. Louis Railroad and completed in 1855. The Alton and St. Louis Railroad constructed a 22 mile line from Alton to East St. Louis in 1856. The railroads were reorganized as the St. Louis, Alton & Chicago Railroad in 1857, and was merged into the Chicago & Alton Railroad (C&A) in 1862. The C&A developed several lines throughout central Illinois, and this route made up the principal mainline of the system. A bypass of Alton between Godfrey and East St. Louis was constructed in As traffic grew on the system through the 1870s and 1880s, the need for a second track became apparent. A second track was added in 1870 between Mazonia and Odell, from 1888 to 1893 between Odell and Bloomington, and through Springfield in 1893. This route became an important route to the Illinois railroad network, providing the most direct connection between St. Louis and Chicago.
Throughout the years, the C&A would be affiliated with several
larger railroads, and the railroad primarily operated as a bridge
route. The C&A was reorganized in 1901, and until 1906 was owned by
the Atchison, Topeka & Santa Fe Railway and the Chicago, Rock
Island & Pacific Railway. Between Bloomington and Springfield, a second track was constructed in 1907, and a second track was constructed in 1911 between Springfield and East St. Louis. A large realignment was made between Atlanta
and Lawndale in 1924. In 1931, the C&A would be reorganized as the Alton Railroad (A), a
subsidiary of the Baltimore & Ohio Railroad. The Alton was sold to
the Gulf, Mobile & Ohio Railroad (GM&O) in 1949, and the various
subsidiaries consolidated at that time. The GM&O merged with the
Illinois Central Railroad to form Illinois Central Gulf (ICG) in 1972.
During the ICG years, the route was downgraded, and the second track mostly removed. This line was excess for the ICG, and the route would be sold to the
Chicago, Missouri & Western Railway (CM&W) in 1987. The CM&W went bankrupt, and the line was sold to the Southern Pacific Railroad in 1989, which became part of Union Pacific Railroad in 1996. During the 2010s, the route was rebuilt for high speed rail. Today, Union Pacific continues to operate this route as the Joliet Subdivision between Joliet and Bloomington, and the Springfield Subdivision between Bloomington and East St. Louis. High speed Amtrak trains also utilize this route.
Located north of Chenoa, this steel stringer bridge carries the former Chicago & Alton Railroad across an unnamed branch of Rooks Creek. The first bridge at this location likely consisted of a timber pile trestle bridge. In the early 1890s, this route was double tracked, and a steel girder bridge was likely constructed here. The bridge was again rebuilt in 1919, and the current structure was built in 1937. The most recent upgrades to the bridge came in approximately 2005, when the eastern track was replaced with modern concrete spans. Currently, the bridge consists of five 15-foot steel stringer and concrete girder spans, set onto concrete piers. The steel stringer spans are currently unused, and the deck has been removed. The steel stringer spans use two stringers each, a relatively light design for the era. It is currently unknown which contractor fabricated the superstructure or which contractor constructed the substructure. Since the initial construction, the base of the piers has been reinforced with sheet metal protection. This type of bridge was commonly used by railroads throughout the United States, as it was durable and easy to construct. Overall, the bridge appears to be in fair to good condition, with no significant deterioration noted. The author has ranked the bridge as being locally significant, due to the common design.
Citations
Build date | Illinois Central Gulf Missouri Division 1979 Track Profile |
Railroad History Citation | ICC Valuation Information, Compiled by Richard S. Steele |