Name | UP Bridge #137.90 Chicago & Alton Railroad Bridge #137.9 |
Built By | Chicago & Alton Railroad |
Currently Owned By | Union Pacific Railroad |
Superstructure Contractor | Unknown |
Length | 8 Feet Total |
Width | 2 Tracks, 1 In Use |
Height Above Ground | 5 Feet (Estimated) |
Superstructure Design | Stone Arch Culvert (West Track) Concrete Arch Culvert (East Track) |
Substructure Design | Stone Masonry (West Track) Concrete (East Track) |
Date Built | c. 1880 (West Track) c. 1902 (East Track) |
Traffic Count | 20 Trains/Day (Estimated) |
Current Status | In Use |
Chicago & Alton Railroad Bridge Number | 137.9 |
Union Pacific Railroad Bridge Number | 137.90 |
Significance | Local Significance |
Documentation Date | 4/2/2023 |
In 1850, the Alton and Sangamon Railroad began construction on a 220 mile railroad line, extending from Joliet, Illinois to Alton, Illinois; with stations in Bloomington and Springfield, Illinois. The railroad was acquired by the Chicago, Alton & St. Louis Railroad and completed in 1855. The Alton and St. Louis Railroad constructed a 22 mile line from Alton to East St. Louis in 1856. The railroads were reorganized as the St. Louis, Alton & Chicago Railroad in 1857, and was merged into the Chicago & Alton Railroad (C&A) in 1862. The C&A developed several lines throughout central Illinois, and this route made up the principal mainline of the system. A bypass of Alton between Godfrey and East St. Louis was constructed in As traffic grew on the system through the 1870s and 1880s, the need for a second track became apparent. A second track was added in 1870 between Mazonia and Odell, from 1888 to 1893 between Odell and Bloomington, and through Springfield in 1893. This route became an important route to the Illinois railroad network, providing the most direct connection between St. Louis and Chicago.
Throughout the years, the C&A would be affiliated with several
larger railroads, and the railroad primarily operated as a bridge
route. The C&A was reorganized in 1901, and until 1906 was owned by
the Atchison, Topeka & Santa Fe Railway and the Chicago, Rock
Island & Pacific Railway. Between Bloomington and Springfield, a second track was constructed in 1907, and a second track was constructed in 1911 between Springfield and East St. Louis. A large realignment was made between Atlanta
and Lawndale in 1924. In 1931, the C&A would be reorganized as the Alton Railroad (A), a
subsidiary of the Baltimore & Ohio Railroad. The Alton was sold to
the Gulf, Mobile & Ohio Railroad (GM&O) in 1949, and the various
subsidiaries consolidated at that time. The GM&O merged with the
Illinois Central Railroad to form Illinois Central Gulf (ICG) in 1972.
During the ICG years, the route was downgraded, and the second track mostly removed. This line was excess for the ICG, and the route would be sold to the
Chicago, Missouri & Western Railway (CM&W) in 1987. The CM&W went bankrupt, and the line was sold to the Southern Pacific Railroad in 1989, which became part of Union Pacific Railroad in 1996. During the 2010s, the route was rebuilt for high speed rail. Today, Union Pacific continues to operate this route as the Joliet Subdivision between Joliet and Bloomington, and the Springfield Subdivision between Bloomington and East St. Louis. High speed Amtrak trains also utilize this route.
Located south of Funks Grove along Old US Route 66, this small stone and concrete arch culvert carries the former Chicago & Alton Railroad over an unnamed creek. The first bridge at this location was likely a timber pile trestle. In approximately 1880, the bridge would be reconstructed with an 8-foot stone arch culvert, set onto stone substructures. The bridge was widened with a concrete arch culvert in approximately 1902, when a second track was constructed. Currently, the structure consists of an 8-foot stone arch culvert carrying the west track, and an 8-foot concrete arch culvert carrying the east track. The east track uses traditionally composed wing walls, which extend at an angle from the culvert. The west track uses wing walls which extend parallel to the tracks. It is currently unknown what contractors may have constructed the culvert. This type of culvert was popular with railroads, as it was durable and easy to construct. While the culvert was originally constructed to carry two tracks, only the western track remains in use. It is unknown if any portion of the culvert has been rehabilitated with a concrete encasement. Overall, the culvert appears to be in fair to good condition, with no significant deterioration noted. The author has ranked this structure as being locally significant, due to the common design.
Citations
Build date (east track) | Based on double tracking of line |
Railroad History Citation | ICC Valuation Information, Compiled by Richard S. Steele |