UP Des Plaines River Bridge (Des Plaines)


Click the photo to view the full-size version

1/26
Date Taken:
Author:
Caption:

Name UP Des Plaines River Bridge (Des Plaines)
Chicago & North Western Railway Bridge #22
Built By Chicago & North Western Railway
Currently Owned By Union Pacific Railroad
Superstructure Contractor American Bridge Company of New York
Substructure Contractor Unknown (North Tracks)
Bates & Rogers Construction Company of Chicago, Illinois (South Track)
Length 270 Feet, 84 Foot Largest Spans
Width 3 Tracks
Height Above Ground 15 Feet (Estimated)
Superstructure Design Through Plate Girder
Substructure Design Stone Masonry and Concrete
Date Built 1910 (North Two Tracks)
1929 (South Track)
Traffic Count 80 Trains/Day (Estimated)
Current Status In Use
Chicago & North Western Railway Bridge Number 22
Union Pacific Railroad Bridge Number 16.43
Significance Local Significance
Documentation Date 11/26/2022

In the early 1850s, several railroad companies began constructing railroad lines radiating from Chicago. The Illinois & Wisconsin Rail Road Company constructed 39 miles of new railroad, extending from Chicago to Cary, Illinois.  The following year, the railroad would be controlled by William B. Ogden, and consolidated into the Chicago, St. Paul & Fond du Lac Rail Road (CStP&FDL).  The CStP&FDL constructed an additional 53 miles to Janesville, Wisconsin in 1855.  The CStP&FDL would be purchased by the Chicago & North Western Railway (C&NW) in 1859.  The C&NW was beginning to construct and acquire a large network of railroads throughout the Midwest.  This line formed a portion of the principal northwest mainline of the C&NW, eventually extending to St. Paul, Minnesota.  At Janesville, traffic was required to run south to Afton to reach the line to Janesville.  Due to increasing traffic along this line, a second track would be constructed beginning in 1882, when a second track was completed from Chicago to Mayfair (Montrose Avenue).  By 1884, the route was double tracked to Des Plaines. 

In 1886, the Janesville & Evanston Railway was incorporated by the C&NW to construct 16 miles of new railroad, connecting Janesville with the existing line at Evansville, Wisconsin.  The railroad would be purchased by the C&NW the following year. By 1893, further double tracking was constructed to Barrington, followed by from Barrington to Janesville between 1898 and 1899.  In the late 19th Century, railroad traffic had become a significant safety hazard for the City of Chicago.  A solution was devised to elevate the railroad tracks throughout the city, placing the railroads upon embankments and constructing subways at each street.  In 1899, the C&NW completed a track elevation from Sangamon Street to Kostner Avenue; followed by Kostner Avenue to Foster Avenue in 1918.  During each of these elevation programs, a third track would be constructed. A third track was completed to Barrington in 1930.  The C&NW would become a prominent railroad in the Midwest, eventually building a system over 11,000 miles long.  Throughout the 20th Century, this line would continue to be an integral part of the C&NW system.  The second track would be removed between Janesville and Harvard in the 1950s.  In 1995, the C&NW would be purchased by the Union Pacific Railroad.  Union Pacific continues to operate the route as the Harvard Subdivision.  Metra operates a commuter service, the Union Pacific-Northwest Line over the Chicago to Harvard section.


Located in the City of Des Plaines, this large through girder bridge carries the Metra UP - Northwest line across the Des Plaines River and Camp Ground Road. The first bridge at this location was timber pile trestle, typical of early bridges along railroads in the Midwest. In 1883-4, the line would be double tracked, and a new iron bridge constructed by Alden & Lassig Bridge Works. The 1883-4 bridge consisted of two 84-foot double intersection Warren pony truss spans and a 50-foot span of the same design, set onto stone substructures. The two tracks were most likely constructed with separate spans placed side by side. By the early 20th Century, the bridge had become too light for traffic, and a new bridge would be constructed in 1910. The new bridge would consist of two 84-foot, one 60-foot and one 50-foot double track through plate girder spans, reusing the stone piers from the previous bridge. In 1929, a third track was constructed, and an additional single track through plate girder bridge was added to the south side of the bridge, giving the bridge its current configuration. The girders for both the 1910 and 1929 spans were fabricated by American Bridge Company, a prominent bridge manufacturer. An unknown contractor constructed the original stone substructures, and another unknown contractor reconstructed the substructures in 1910. The Bates & Rogers construction Company constructed the concrete substructures for the third track.

Upon replacement of the old bridge, the spans were reused in various capacities. One 84-foot span was reused as an overpass in Wisconsin, before being relocated to its present location in 1998. The remaining spans were likely reused as well, although it is unknown where they were moved to. The girder spans utilize a ballast deck and typical C&NW design, with rounded and tapered edges. This type of bridge was commonly used, due to the durable and easy to construct nature of the design. Overall, the bridge appears to be in fair to good condition, with no significant deterioration noted. The author has ranked the bridge as being locally significant, due to the common design.


Citations

Builder and build date (north tracks) Chicago & North Western Valuation Notes at the Chicago & North Western Historical Society Archives
Build date (south track) Triple tracking of line
Builder (south track) Missing American Bridge Company plaque
Railroad History Citation ICC Valuation Information, Compiled by Richard S. Steele

Loading...