Name | NS Bridge #40.00 New York Central Railroad Bridge #288 |
Built By | Peoria & Eastern Railway |
Currently Owned By | Norfolk Southern Railway |
Superstructure Contractor | Unknown |
Length | 10 Feet |
Width | 1 Track |
Height Above Ground | 5 Feet (Estimated) |
Superstructure Design | Concrete Arch Culvert |
Substructure Design | Concrete |
Date Built | 1913 |
Traffic Count | 1 Train/Day (Estimated) |
Current Status | In Use |
New York Central Railroad Bridge Number | 288 |
Norfolk Southern Railway Bridge Number | 40.00 |
Significance | Local Significance |
Documentation Date | 11/6/2022 |
In 1869, the Indianapolis, Crawfordsville & Danville Railroad constructed 85 miles of new railroad, extending from Indianapolis, Indiana to Danville, Illinois. At the same time, the Danville, Urbana, Bloomington & Pekin Railroad Company (DUB&P) constructed 117 miles of new railroad, connecting Danville with Pekin, Illinois. The two lines operated jointly, connecting the railroad hub of Indianapolis with the Illinois River at Pekin. The two railroads were reorganized as the Peoria & Eastern Railway (P&E) in 1890. The P&E was affiliated with the Cleveland, Cincinnati, Chicago & St. Louis Railway, known as the Big Four. This route provided the Big Four with a crucial branch line to reach the Peoria area, which provided an inland port connection (via the Illinois and Mississippi Rivers) for the railroad. The route also connected to many other moderate sized cities in Illinois, such as Danville, Champaign-Urbana and Bloomington. The Big Four came under the control of the New York Central Railroad (NYC) in 1906. The NYC was controlled by railroad magnate Cornelius Vanderbilt, and operated an extensive network of railroad lines in the eastern United States. The P&E formally merged into the Big Four in 1913, and the Big Four was operated as a separate entity from the NYC until approximately 1930.
This route was maintained by the NYC, and the parallel Lake Erie & Western Railroad (LE&W), which was controlled by NYC, was sold to the New York, Chicago & St. Louis Railroad (Nickel Plate) in 1922. While the LE&W route did not connect with Indianapolis, the two routes interchanged at Bloomington. In 1968, NYC merged with rival Pennsylvania Railroad to form Penn
Central Railroad. The Penn Central Railroad was short lived, as it was
plagued by operations issues stemming from the merger of the two
systems. The railroad filed for bankruptcy in 1974, and many of the lines were
reorganized into Conrail. Conrail was formed by the Federal Government
to take over profitable lines of multiple bankrupt railroad companies in
the eastern United States. A short segment in Indianapolis would not be included in Conrail, and would be abandoned. The section between Crawfordsville, Indiana and Olin, Indiana would be abandoned in 1982, followed by the section from Bloomington to Pekin in 1984. In 1997, Norfolk Southern Railway and CSX Transportation agreed to
purchase the bankrupt Conrail System. CSX took control of the remaining
portions of the line between Indianapolis and Crawfordsville and between Bloomington and Olin, and NS took control of the line between Champaign and Danville. The section between Danville and Urbana would be abandoned in 1999, and the segment to Olin would be sold to the Vermillion Valley Railroad in 2003. Today, CSX operates the Indianapolis to Crawfordsville portion as the Crawfordsville Branch. Norfolk Southern operates the Urbana to Mansfield portion of the line as the Mansfield Branch. Between Mansfield and Bloomington, the line is out of service, but has not been formally abandoned. Negotiations were underway to acquire the right-of-way for trail use. The Vermillion Valley Railroad continues to operate a short segment east of Danville.
Located alongside Sunny Acres Road on the east side of Mahomet, this concrete arch culvert carries the former Peoria & Eastern Railway across an unnamed creek. The previous bridge at this location likely a timber pile trestle, constructed when the line was built. In 1913, the trestle bridge would be replaced by the current 10-foot concrete arch culvert. The culvert uses standard concrete abutments, and has wing walls which extend nearly perpendicular to the structure. This design of bridge was commonly used by railroads, as it was durable, easy to construct and could be installed with minimum interruption to traffic. Overall, the bridge appears to be in fair condition, with some spalling noted throughout the structure. The author has ranked the bridge as being locally significant, due to the common design.
Citations
Build date | Date stamp |
Railroad History Citation | ICC Valuation Information, Compiled by Richard S. Steele |