WSOR Fisher Creek Bridge


Click the photo to view the full-size version

1/22
Date Taken:
Author:
Caption:

Name WSOR Fisher Creek Bridge
Chicago, Milwaukee & St. Paul Railway Bridge #F-28
Built By Chicago, Milwaukee & St. Paul Railway
Currently Owned By State of Wisconsin (Operated by Wisconsin & Southern Railroad)
Superstructure Contractor Unknown
Length 110 Feet Total, 40 Foot Main Span
Width 1 Track
Height Above Ground 50 Feet (Estimated)
Superstructure Design Deck Plate Girder
Substructure Design Concrete
Date Built 1909, Using Spans Fabricated 1892; Rehabilitated 2014
Traffic Count 2 Trains/Day (Estimated)
Current Status In Use
Chicago, Milwaukee & St. Paul Railway Bridge Number F-28
Wisconsin & Southern Railroad Bridge Number F-28
Significance Moderate Significance
Documentation Date 2/19/2023

In 1853, the Southern Wisconsin Rail Road completed an 8 mile spur from an existing railroad at Milton Junction, Wisconsin to Janesville, Wisconsin.  In 1856, the railroad would be acquired by the Milwaukee & Mississippi Rail Road (M&M), which owned the existing mainline at Milton Junction.  At the same time, the Mineral Point Railroad (MPR) constructed 17 miles of new railroad between Warren, Illinois and Darlington, Wisconsin.  In 1857, the M&M completed an additional 34 miles of railroad to Monroe, Wisconsin.  In addition, the MPR completed an additional 15 miles north to Mineral Point, Wisconsin.  The M&M was acquired by the Milwaukee and Prairie du Chien Railway (M&PdC) in 1861, which was sold to the Milwaukee & St. Paul Railway (M&StP) in 1867.  In 1874, the M&StP changed its name to the Chicago, Milwaukee & St. Paul Railway (Milwaukee Road).  In 1880, the MPR was acquired by the Milwaukee Road, and the following year an additional 22 miles would be constructed to connect Monroe to Gratoit.  

This line served as a secondary route for the Milwaukee Road, mainly providing access to valuable metal deposits in southwest Wisconsin.  The route also allowed for the construction of numerous branch lines, including branches to Shullsburg, Wisconsin and Platteville, Wisconsin.  By the 20th Century, the Milwaukee Road had become a prominent railroad in the United States, operating an expansive network of railroad lines, primarily in the Midwest.  The Milwaukee Road was often in financial trouble, especially after the costly Pacific Extension was completed in 1909. The branch between Gratoit and Warren was abandoned in 1923.  In 1925, the company declared bankruptcy, and reorganized as the Chicago, Milwaukee, St. Paul and Pacific Railroad in 1928. Throughout the 20th Century, conditions on the Milwaukee Road continued to deteriorate.  This line began to fall into disrepair, and was downgraded to a branch line.  

The railroad again entered bankruptcy in 1977, and was forced to liquidate unprofitable lines.  By the late 1970s, much of the railroad was extremely overgrown, and the tracks in very poor condition. In 1980, the entire branch was sold to the State of Wisconsin, which leased it to the Chicago, Madison and Northern Railway (CM&N) that year. The CM&N was short lived, and became part of the Central Wisconsin Railroad in 1982, which became part of the Wisconsin & Calumet Railroad (WICT) in 1985.  The same year, the entire branch west of Monroe was abandoned and turned into a trail.  In 1993, the WICT was acquired by the Wisconsin Southern Railroad, and was formally merged in 1997.  Since WSOR began operations of the line, significant upgrades have been made to the line, significantly improving service.  Today, WSOR continues to operate the Milton Junction to Janesville segment as part of the Madison Subdivision and the Janesville to Monroe segment as the Monroe Subdivision.  The Cheese Country Trail currently uses the right-of-way between Monroe and Mineral Point.


Located on the west side of Janesville, this deck plate girder bridge carries the former Chicago, Milwaukee, St. Paul & Pacific Railroad Mineral Point Division across Fisher Creek in Rockport Park. The first bridge at this location was likely a tall timber pile trestle bridge. In 1894, the bridge was replaced by three 31-foot deck plate girder spans, fabricated by the Lassig Bridge & Iron Works, set onto stone abutments and steel bents. In 1909, the bridge would again be replaced by three secondhand deck plate girder spans, set onto new concrete substructures. Two of the old spans were reused at Bridge #BB-38 in Montana, and the third span was reused at Bridge #C-142 1/2. The spans at Bridge #BB-38 remain intact today. Currently, the bridge consists of a 40-foot and two 35-foot deck plate girder spans, set onto concrete substructures. The 40-foot span was reused from Bridge #A-206 near Wadsworth, Illinois, while the two 35-foot spans were reused from Bridge #A-176 near Gurnee, Illinois. All of the girders were originally fabricated in 1892 by unknown contractors for double track type "B" structures, which were replaced by concrete culverts in 1909. Type "B" girders used two plate girders without stringers, with the ties set directly onto hangers riveted to the inside of the girders.

Upon relocation, the girders were "twinned" by combining four girders into a single span. The superstructure uses a typical design for twinned girders, with shallow girders, extensive renovations and a ballast deck constructed of creosoted timber. Renovations to the structure include the replacement of the original interior bracing. The original hangers which carried the ties in the original configuration are still intact, but are not in use. These renovations were completed by the Milwaukee Road at their bridge shops in Tomah, Wisconsin. The substructures use an unusual design, with the west abutment using a tall wall style abutment with sloped wing walls, the east abutment using a standard rectangular abutment and the piers using a tall concrete column design. The substructures were constructed by labor employed by the Milwaukee Road Bridge & Building Department, typical of concrete bridges constructed by the Milwaukee Road. Railroads often reused steel and iron spans, as it provided a cost effective way to upgrade branch line bridges without requiring large amounts of new material. The Milwaukee Road used secondhand spans wherever possible, often strengthening or rebuilding them at the bridge shops. Since the initial construction, the bridge has seen some alterations, including the encasement of the substructures in 2014. Overall, the bridge appears to be in fair to good condition, with no significant deterioration noted. The author has ranked this bridge as being moderately significant, due to the age and relocation history.


Citations

Build dates and relocation history Milwaukee Road Drawing Collection, located at the Milwaukee Road Archives at the Milwaukee Public Library
Railroad History Citation ICC Valuation Information, Compiled by Richard S. Steele

Loading...