Name | KYLE Republican River Bridge (Scandia) Chicago, Rock Island & Pacific Railroad Bridge #1990 |
Built By | Chicago, Rock Island & Pacific Railroad |
Currently Owned By | Kyle Railroad |
Superstructure Contractor | American Bridge Company of New York |
Length | 465 Feet Total, 155 Foot Spans |
Width | 1 Track |
Height Above Ground | 15 Feet (Estimated) |
Superstructure Design | Warren Through Truss |
Substructure Design | Concrete |
Date Built | 1904 |
Traffic Count | 2 Trains/Day (Estimated) |
Current Status | In Use |
Chicago, Rock Island & Pacific Railroad Bridge Number | 1990 |
Significance | Moderate Significance |
Documentation Date | 1/1/2020 |
In 1887, the Chicago, Kansas & Nebraska Railway (CK&N) continued building west from Fairbury, Nebraska; where they had left off the year before. The CK&N was almost exclusively funded by the Chicago, Rock Island & Pacific Railroad (Rock Island). The Rock Island sought to expand west through Nebraska, Kansas and Colorado, where they saw an entrance to the Denver market as vital for the railroad. By the end of 1887, the railroad had reached Mankato, Kansas; where work paused for the winter. The route chosen went southwest towards Belleville, Kansas, before turning straight west. At Belleville, the line intersected another route, which was built into eastern Kansas. In the spring of 1888, work continued westwards, running through Smith Center, Phillipsburg, Norton and Colby, before reaching the Colorado/Kansas state line west of Goodland. Work continued to Limon, Colorado the same year. At Limon, the route turned south and ended in Colorado Springs. In 1891, the CK&N failed to make a payment to the Rock Island. As a result, the Rock Island took over ownership and operations entirely. The Rock Island secured trackage rights from Colorado Springs to Denver, and built a connecting route between Omaha and a point near Fairbury, to connect this line to the mainline across Illinois and Iowa. The Rock Island was a poor railroad, facing financial trouble regularly and often in bankruptcy. This route hosted passenger trains known as "Rockets" for many years, although passenger trains were later discontinued. After World War II, the Rock Island struggled to survive, proposing mergers and deferring maintenance on their routes. Rock Island sought to keep interchange traffic between Denver and Chicago running on this line, struggling to compete with a stronger and better constructed Union Pacific system.
By 1964, the Rock Island began attempts to merge with Union Pacific, and restructure railroads west of the Mississippi River. This merger was eventually denied, and Rock Island turned its last profit in 1965. In the mid-1970s, the railroad was in serious decline. The railroad received loans to attempt to fix slow orders, received new equipment and turn a profit. By 1978, the railroad came close to profit, but creditors were lobbying for a complete shutdown of the Rock Island. During the fall of 1979, a strike crippled the railroad, and by January of 1980, the entire system was ordered to be shut down and liquidated. Many of the lines and equipment were scrapped. Profitable sections of railroad were prepared for sale. The route between Limon and Colorado Springs was abandoned, as well as the Belleville to Fairbury segment. The section between Limon and Belleville was sold to Mid States Port Authority in 1982, and began operations under the newly formed KYLE Railroad the same year. Today, the remaining route makes up the backbone of the KYLE Railroad system, which is now owned by Genesee & Wyoming, which operates numerous other North American railroads. Union Pacific Railroad also operates a short segment from Fairbury to Jansen, Nebraska. In Fairbury, a small segment and a bridge still exist as a local trail.
Located in Scandia, this large through truss bridge crosses the Republican River. The first bridge at this location was likely a combination truss or a quadrangular lattice through truss. In 1904, the bridge would be replaced by three 155-foot, 6-panel riveted Warren through truss spans, set onto concrete substructures. This design of truss was the standard design for the Rock Island between approximately 1900 and 1910. The truss design utilizes heavily constructed members, riveted connections and a double intersection lattice style portal bracing, with solid heel braces. Numerous examples of this particular size and design of truss were constructed for the Rock Island, particularly along mainlines throughout Illinois, Iowa, Nebraska, Kansas, Oklahoma and Missouri. The Warren design became the standard truss design for most railroads during the 20th Century, as it provided greater loading capacities for medium sized spans than Pratt spans. Overall, the bridge appears to be in fair condition, with no significant deterioration noted. Numerous areas of the bridge exhibit various forms of strike damage from shifting loads. The author has ranked this bridge as being moderately significant, due to the truss design.
Citations
Builder and build date | American Bridge Company plaque |
Railroad History Citation | ICC Valuation Information, Compiled by Richard S. Steele |