Name | CPKC Old IL Route 26 Bridge Chicago, Milwaukee & St. Paul Railway Bridge #Z-400 1/2 |
Built By | Chicago, Milwaukee, St. Paul & Pacific Railroad |
Currently Owned By | Canadian Pacific Kansas City Limited |
Superstructure Contractor | Unknown |
Substructure Contractor | St. Clair Construction Company of Wheaton, Illinois |
Length | 95 Feet Total, 37 Foot Span |
Width | 2 Tracks, 1 In Use |
Height Above Ground | 15 Feet (Estimated) |
Superstructure Design | Steel Stringer |
Substructure Design | Concrete |
Date Built | 1936 |
Traffic Count | 10 Trains/Day (Estimated) |
Current Status | In Use |
Chicago, Milwaukee, St. Paul & Pacific Railroad Bridge Number | Z-400 1/2 |
Significance | Local Significance |
Documentation Date | 4/20/2019 |
In 1872, the Chicago and Pacific Railroad was charted to construct a
new 88-mile railroad line extending from Chicago, Illinois to Byron,
Illinois. Construction began on the line in 1873, and the line was
completed to Elgin in 1874, followed by to Byron in 1876. In Chicago,
the railroad crossed the Chicago River three times, crossed Goose Island
and turned west along Bloomingdale Avenue. In 1880, the railroad came
under lease of the Chicago, Milwaukee & St. Paul Railway, commonly
known as the Milwaukee Road. The Milwaukee Road continued construction,
reaching Kittredge, Illinois in 1882. At Kittredge, this line
connected to a line that had been completed to Savanna, Illinois by the
Northern Illinois Railroad in 1862. This line became a principal
mainline for the Milwaukee Road, later extending across Iowa to reach
Omaha. Because of the importance of this line, the portion of the line
west of Bloomingdale Avenue in Chicago to Bensenville was double tracked
in 1885. In 1892, construction on a second track began between
Bensenville and Genoa, which would be completed in 1897. By 1899, the
line was double tracked to Savanna.
By the 20th Century, the Milwaukee Road had become a prominent railroad in the United States, operating a network of railroad lines primarily in the Midwest. The Milwaukee Road was often in financial trouble, especially after the costly Pacific Extension was completed in 1909. In 1925, the company declared bankruptcy, and reorganized as the Chicago, Milwaukee, St. Paul and Pacific Railroad in 1928. This line continued to serve as a critical mainline for the railroad during the 20th Century, as it provided a connection between Chicago and the mainlines to Omaha and Kansas City. Significant upgrades were made during the 1930s and 1940s, including replacing bridges and revising curves. During the 1970s, conditions of the line gradually deteriorated, and much of the second track was removed in the late 1970s.
Portions of the line in Chicago were removed in the late 1970s. By 1985, a suitor for the Milwaukee Road was being sought, and the Soo Line Railroad, controlled by Canadian Pacific Railway (CP) purchased the Milwaukee Road in 1986. In 1997, CP would sell the line segment to I&M Rail Link, which was purchased by the Dakota, Minnesota & Eastern Railroad (DM&E) subsidiary Iowa, Chicago & Eastern Railroad (IC&E). Portions of the Bloomingdale Line between Pacific Junction and the Kennedy Expressway were abandoned in 2001. Chicago Transfer Railway (CTR) began operations around Goose Island in 2007, using former Milwaukee Road trackage. The DM&E/IC&E were purchased by Canadian Pacific in 2008. The CTR trackage was abandoned in 2018. CP merged with Kansas City Southern Railway in 2023 to form CPKC. Today, CPKC operates the Elgin Subdivision between Pacific Junction and Randall Road in Elgin; and the Chicago Subdivision between Elgin and Savanna. In addition, Metra operates commuter service as the Milwaukee West line over the Elgin Subdivision.Located west of Forreston, this steel stringer bridge carries the former Chicago, Milwaukee, St. Paul & Pacific Railroad over a former alignment of Illinois Route 26. During the 1930s and 1940s, the Illinois Department of Public Works and Buildings (now Illinois Department of Transportation) worked with railroads throughout the state to construct grade separations at major highways. This bridge was constructed in 1936 as part of an effort to improve Illinois Route 26. The bridge consists of a double track 37-foot steel stringer span, set onto long concrete abutments. The bridge utilizes a ballast floor constructed of parallel beams, typical for bridges of this era. The abutments of the bridge utilize decorative features, including insets, decorative walls and attractive railings. This design of bridge was popular for grade separations throughout the United States, as it provided a durable, aesthetic and easy to construct design. In addition, this particular design was the standard of the Milwaukee Road, which constructed numerous examples of this type of structure during the mid-1930s. Overall, the bridge appears to be in fair condition, with minor spalling noted throughout the substructure. The roadway underneath was realigned in the early 1990s, and the bridge now crosses an empty right-of-way. The author has ranked the bridge as being locally significant, due to the common design and newer age.
Citations
Build date | National Bridge Inventory (NBI) |
Builder | Engineering News-Record; Volume 116, Issue 1 |
Railroad History Citation | ICC Valuation Information, Compiled by Richard S. Steele |