| Name | UP US-65 Bridge (Colo) Chicago & North Western Railway Bridge #525 |
| Built By | Chicago & North Western Railway |
| Currently Owned By | Union Pacific Railroad |
| Superstructure Contractor | McClintic-Marshall Corporation of Pittsburgh, Pennsylvania |
| Substructure Contractor | Zitterell-Mills Company of Webster City, Iowa |
| Length | 94 Feet Total, 34 Foot Main Span |
| Width | 2 Tracks |
| Height Above Ground | 14 Feet 4 Inches |
| Superstructure Design | Steel Stringer |
| Substructure Design | Concrete and Steel Bent |
| Date Built | 1934 |
| Traffic Count | 50 Trains/Day (Estimated) |
| Current Status | In Use |
| Chicago & North Western Railway Bridge Number | 525 |
| Union Pacific Railroad Bridge Number | 173.13 |
| Significance | Local Significance |
| Documentation Date | 8/28/2016; 1/9/2022 |
In 1856, the Chicago, Iowa & Nebraska Rail Road (CI&N) began construction on a new mainline across Iowa, connecting an existing Galena & Chicago Union Railroad (G&CU) line at Fulton, Illinois to the Missouri River. To establish construction, a temporary ferry was installed across the Mississippi River at Clinton in 1856. In 1857, the first 44 miles were completed to Wheatland, Iowa. The following year, 20 miles were completed to Lisbon, Iowa; and in 1859, an addition 17 miles were completed to Cedar Rapids, Iowa. In 1861, the Cedar Rapids & Missouri River Railroad (CR&MR) constructed an additional 41 miles to Chelsea, Iowa; followed by 29 miles to Marshalltown, Iowa in 1862. After pausing in 1863, an additional 29 miles were completed to Nevada, Iowa in 1864, followed by 23 additional miles to Boone, Iowa in 1865. In 1864, both the CI&N and CR&MR were leased by the Chicago & North Western Railway (C&NW). In 1867, the line continued west from Boone, reaching the Missouri River at Council Bluffs, Iowa in 1867.
During the second half of the 19th Century, the C&NW had constructed and acquired a large amount of trackage throughout the Midwest. This line formed a principal mainline for the C&NW, connecting western railroads at Omaha to the railroad hub of Chicago. In 1884, the C&IN and CM&MR were formally acquired by the C&NW. In 1887, the Linn County Railway (LC) constructed a 6-mile cutoff, bypassing Cedar Rapids to the south between Otis, Iowa and Beverly, Iowa. At the end of the year, the LC was formally acquired by the C&NW. During the late 19th Century, several other improvements were made to this line. Between 1890 and 1891, a second track was constructed between Clinton and Lowden, Iowa; and between Libson and the Cedar River bridge. Between 1893 and 1894, a second track was constructed between Lowden and Lisbon. A second track was added to the original mainline through Cedar Rapids in 1898, and between 1898 and 1899, a second track was constructed between the Cedar River bridge and the west side of Marshalltown. In 1901, a second track was completed between Marshalltown and Boone, and new facilities were constructed at Boone. Throughout the 20th Century, the Cedar River bridge remained a gauntlet structure, severely hindering efficient operations.
By the 20th Century, the C&NW was operating an extensive railroad network, which radiated north and west from Chicago. This line served as the backbone of the C&NW, connecting transcontinental freight and passengers at Omaha to Chicago. Known as the Overland Route, this line became one of the most significant railroad routes in the United States. This route saw continuous upgrades during the 20th Century, including significant bridge, rail, tie and signal upgrades. In 1995, the C&NW was purchased by Union Pacific Railroad (UP). In 2002, UP constructed a second track at the Cedar River bridge, eliminating a single track bottleneck in the network. Today, this line remains vital to UP and is still well maintained. The Clinton to Boone segment is known as the Clinton Subdivision, and remains a heavily used double track mainline.
Located on the east side of Colo, this steel stringer bridge carries a former Chicago & North Western Railway mainline over US Highway 65 (former Jefferson Highway). In 1916, the Jefferson Highway was designated to connect Houston, Texas with Winnipeg, Canada. This named highway was one of the first major north-south roadways designated in the United States, and was developed at a time when automobile travel was becoming a popular method of transportation. At Colo, the Jefferson Highway would intersect the Lincoln Highway, one of the major east-west roadways, connecting San Francisco, California with New York City. The intersection became important for travelers, and a service station was developed at Reed/Niland Corner in the early 1920s. Starting in the late 1920s, the Iowa State Highway Commission began improving major roadways throughout the State of Iowa. Many of these projects involved constructing grade separations at busy railroad crossings and paving major roads. In 1933, a project was authorized to construct an interchange at the intersection of the Jefferson and Lincoln Highways. As part of the work, an underpass was proposed at the busy crossing of the C&NW mainline. Contracts were awarded in late 1933 and early 1934, and the work was completed through the summer of 1934.
Currently, the underpass consists of a double track 34-foot and two 30-foot steel stringer spans, set onto concrete abutments and steel bent piers. The superstructure follows a standard design for the era, with six shallow beams per track and a ballast deck. The ballast deck is formed by a steel plate ballast channel. The abutments use a standard rectangular shape with no wing walls, and the piers are composed of three columns, connected by a steel girder at the top and set onto concrete pedestals. Typical of most grade separations in Iowa from this era, the bridge uses no decorative features and is purely functional. McClintic-Marshall Corporation fabricated the steel at their Chicago plant, while the Zitterell-Mills Company constructed the substructures. Steel stringer spans were popular for railroad use, as they were durable and easy to construct. Since the initial construction, the bridge has seen no significant alterations, and remains in regular use. Overall, the bridge appears to be in fair to good condition, with no significant deterioration noted. The author has ranked this bridge as being locally significant, due to the common design.
Citations
| Build date | Date stamp |
| Builder (superstructure) | Chicago & North Western Railway Drawing Collection at the Chicago & North Western Historical Society Archives |
| Builder (substructure) | Railway Age; Volume 96, Issue 2 |
| Railroad History Citation | ICC Valuation Information, Compiled by Richard S. Steele |