| Name | UP Bridge #173.17 Chicago & North Western Railway Bridge #526 |
| Built By | Chicago & North Western Railway |
| Currently Owned By | Union Pacific Railroad |
| Contractor | Morris & Foley of St. Paul, Minnesota (North Track) Widell Company of Mankato, Minnesota (South Track) |
| Length | 10 Feet Total |
| Width | 2 Tracks (52 Feet) |
| Height Above Ground | 10 Feet (Estimated) |
| Superstructure Design | Stone Arch Culvert |
| Substructure Design | Stone Masonry |
| Date Built | 1890, Widened 1900 |
| Date Filled | 2022 |
| Traffic Count | 0 Trains/Day (Bridge has been Filled) |
| Current Status | Filled In |
| 526 | |
| Union Pacific Railroad Bridge Number | 173.17 |
| Significance | Local Significance |
| Documentation Date | 8/28/2016; 1/9/2022 |
In 1856, the Chicago, Iowa & Nebraska Rail Road (CI&N) began construction on a new mainline across Iowa, connecting an existing Galena & Chicago Union Railroad (G&CU) line at Fulton, Illinois to the Missouri River. To establish construction, a temporary ferry was installed across the Mississippi River at Clinton in 1856. In 1857, the first 44 miles were completed to Wheatland, Iowa. The following year, 20 miles were completed to Lisbon, Iowa; and in 1859, an addition 17 miles were completed to Cedar Rapids, Iowa. In 1861, the Cedar Rapids & Missouri River Railroad (CR&MR) constructed an additional 41 miles to Chelsea, Iowa; followed by 29 miles to Marshalltown, Iowa in 1862. After pausing in 1863, an additional 29 miles were completed to Nevada, Iowa in 1864, followed by 23 additional miles to Boone, Iowa in 1865. In 1864, both the CI&N and CR&MR were leased by the Chicago & North Western Railway (C&NW). In 1867, the line continued west from Boone, reaching the Missouri River at Council Bluffs, Iowa in 1867.
During the second half of the 19th Century, the C&NW had constructed and acquired a large amount of trackage throughout the Midwest. This line formed a principal mainline for the C&NW, connecting western railroads at Omaha to the railroad hub of Chicago. In 1884, the C&IN and CM&MR were formally acquired by the C&NW. In 1887, the Linn County Railway (LC) constructed a 6-mile cutoff, bypassing Cedar Rapids to the south between Otis, Iowa and Beverly, Iowa. At the end of the year, the LC was formally acquired by the C&NW. During the late 19th Century, several other improvements were made to this line. Between 1890 and 1891, a second track was constructed between Clinton and Lowden, Iowa; and between Libson and the Cedar River bridge. Between 1893 and 1894, a second track was constructed between Lowden and Lisbon. A second track was added to the original mainline through Cedar Rapids in 1898, and between 1898 and 1899, a second track was constructed between the Cedar River bridge and the west side of Marshalltown. In 1901, a second track was completed between Marshalltown and Boone, and new facilities were constructed at Boone. Throughout the 20th Century, the Cedar River bridge remained a gauntlet structure, severely hindering efficient operations.
By the 20th Century, the C&NW was operating an extensive railroad network, which radiated north and west from Chicago. This line served as the backbone of the C&NW, connecting transcontinental freight and passengers at Omaha to Chicago. Known as the Overland Route, this line became one of the most significant railroad routes in the United States. This route saw continuous upgrades during the 20th Century, including significant bridge, rail, tie and signal upgrades. In 1995, the C&NW was purchased by Union Pacific Railroad (UP). In 2002, UP constructed a second track at the Cedar River bridge, eliminating a single track bottleneck in the network. Today, this line remains vital to UP and is still well maintained. The Clinton to Boone segment is known as the Clinton Subdivision, and remains a heavily used double track mainline.
Located near US Highway 65 in Colo, this small stone arch culvert carried a former Chicago & North Western Railway mainline over an unnamed creek. The first bridge at this location was likely a timber pile trestle bridge, constructed when the line was first built and periodically renewed. As this line became a critical mainline for the C&NW, timber bridges were gradually replaced with stone, iron and steel structures. The timber bridge was replaced by a stone arch culvert in 1890, and the remainder filled. During a double tracking project in 1900, the culvert was extended south, giving the structure its final configuration. The culvert consisted of a 10-foot stone arch culvert, set onto stone substructures and constructed at a width of 52 feet. The culvert followed a standard design, with a semicircular arch and stepped wing walls extending diagonally from the structure. Unique to this culvert, tall headwalls were used. Stone for the culvert consisted of a yellow limestone, quarried at Mankato, Minnesota. Morris & Foley are believed to have constructed the north portion of the culvert, while the Widell Company constructed the south portion. The Widell Company had a large contract for stonework required for double tracking the Iowa Division between 1898 and 1902. Stone arches were popular for railroad use, as they were durable, cost effective and easy to construct. Throughout the 20th Century, the culvert saw no significant alterations, and remained heavily used. In 2022, the culvert was replaced by a new pipe culvert, and the original structure demolished. At the time of documentation, the culvert appeared to be in fair to good condition, with only minor cracking noted to the stone. The author has ranked this culvert as being locally significant, due to the common design.
Citations
| Build dates | Chicago & North Western Railway Valuation Notes at the Chicago & North Western Historical Society Archives |
| Builder (north track) | Based on additional stone arches constructed along this line during 1890 |
| Builder (south track) | The Improvement Bulletin; November 18, 1899 |
| Railroad History Citation | ICC Valuation Information, Compiled by Richard S. Steele |